Before you start: what you need

  • Microfibre cloths, several (Secretlab sprays cleaner onto the cloth, not the chair).
  • A mild soap solution, where allowed: diluted dish soap for tougher leatherette stains (Secretlab, DXRacer, AndaSeat). Razer Iskur V2 X: do not use soap at all.
  • A vacuum with a soft brush attachment (Secretlab: leatherette and fabric, care not to scratch leatherette; AndaSeat: fabric and mesh; DXRacer AIR-PRO V2: mesh).
  • A dry, absorbent cloth or paper towels, for spills (Secretlab and AndaSeat: soak fabric spills up at once; Secretlab: no printed cloths or paper towels on microsuede, ink can transfer).
  • Your maker's own cleaner or wipes, if any (Secretlab: Premium Leather Cleaner, SoftWeave Plus foam cleaner, plus wipes; AndaSeat: PU cleaner on heavily soiled PU).
  • The Allen key supplied with the chair, for bolt checks (Secretlab: M8 screws).

Do not bring: harsh chemicals, solvents or abrasive cleaners; alcohol based cleaners; hot water on fabric spills; or direct heat for drying.

At build: build on a soft, clean surface (Secretlab Titan Evo manual); watch the assembly video or guide first (DXRacer's official FAQ: a must, because it carries the safety information; most customers need about 20 minutes); push each caster in until it clicks into place (Secretlab).

How to clean a gaming chair by material

Wipe perspiration off regularly and clean spills at once, sitting only when fully dry after a shower (Secretlab Aftercare Guide; AndaSeat and Razer publish the same rules). Perspiration is acidic and degrades the leatherette's top coating (Secretlab); friction, skin and bodily fluids degrade materials over time (Razer). Limit constant bare skin contact, especially in warm, humid conditions (Secretlab). Keep the chair out of direct sunlight and away from radiators, fireplaces and other heat, and keep pets' claws and teeth off the cover (all four makers, for the fading, cracking and degradation each names; AndaSeat: keep pet nails trimmed). Do not wedge the armrests under the desk, let their tops strike its underside when tilting, or place heavy objects on them (Secretlab, Razer).

Leatherette and PU or PVC leather

  1. Vacuum first, soft brush attachment, taking care not to scratch leatherette (Secretlab).
  2. Wipe light marks with a cloth slightly dampened with water, at once while fresh (Secretlab, DXRacer).
  3. Tougher stains: maker's cleaner or mild soap solution, on the cloth, never poured on. Secretlab: Premium Leather Cleaner on a microfibre cloth, wipe gently, or diluted dish soap solution (Titan Evo), then wipe residue with a clean damp cloth and dry at once. DXRacer: mild soap solution, clean cloth, wipe dry immediately (Sentinel). AndaSeat: mild soap solution (ArteDiPelle, DuraXtra), test on a small area first; PU: mild soap and warm water, no scrubbing; heavily soiled PU: PU leather cleaner.
  4. Air dry completely before use (Secretlab, DXRacer, AndaSeat). No heat.

Harsh chemicals, abrasive cleaners and solvents are allowed by no maker here: they can harm the surface and lead to cracking or peeling.

Woven fabric

  1. Vacuum loose particles and dirt (Secretlab, AndaSeat).
  2. Blot spills at once, never rub, with a dry absorbent cloth or paper towel (Secretlab). AndaSeat Kaiser manual, for linen: clean, dry cloth, do not rub. Secretlab: do not rub the stain in or use hot water, as this may set the stain.
  3. Spot clean stubborn marks. Secretlab: foam fabric cleaner on a clean microfibre cloth, wipe gently. AndaSeat: mild soap and water on a soft cloth, no scrubbing, no forceful wiping. DXRacer: damp cloth and mild soap.
  4. Air dry completely before use (Secretlab, AndaSeat).

Mesh

Vacuum regularly (AndaSeat). Deeper clean: mild soap solution, soft cloth, gently; do not soak the cushioned seat, because soaking can affect foam quality (AndaSeat). DXRacer AIR-PRO V2: soft brush or vacuum brush attachment; blot spills with a damp cloth and mild soap solution, wipe dry; memory foam cushions spot cleaned only, do not saturate.

Genuine leather, microsuede and the metal and plastic parts

Secretlab NAPA leather (not water resistant): soak spills up at once with a dry absorbent cloth, wipe gently with a microfibre cloth slightly dampened with water, vacuum with a soft brush attachment, condition often, or at least once every three months. Microsuede, Alcantara and Dinamica (not water resistant): keep away from water, wipe loose dirt with a dry microfibre cloth against the grain, blot spills dry, use those makers' specialised solutions. Metal and plastic: slightly damp cloth, little water on metal (rust risk), prompt dry with a lint free towel (AndaSeat).

The Razer exception, stated plainly

For a Razer Iskur V2 X, follow Razer over the soap steps above. The Razer Iskur V2 X Master Guide: clean once a month with a soft or microfibre cloth and a bit of warm water, clean spills immediately, air dry completely, do not use soap, harsh cleaning agents or abrasives. The Iskur V2 manual allows only a mild, non abrasive faux leather cleaner on its synthetic leather.

Gaming chair maintenance checklist

Each maker's own intervals; where a maker publishes no fixed interval, the table says so.

TaskHow oftenSource
Thorough clean: vacuum, then wipe down with a soft clothWeeklyAndaSeat Aftercare Guide
Clean with a soft or microfibre cloth and warm water (no soap on this line)Once a monthRazer Iskur V2 X Master Guide
Wipe perspiration and dirt off with a slightly damp clothRegularly, no fixed intervalSecretlab Aftercare Guide
Wipe down upholstery and spot clean spillsRoutinely, no fixed intervalDXRacer chair manuals and official FAQ
Condition genuine leatherOften, or at least once every three monthsSecretlab Aftercare Guide (NAPA leather)
Check all parts and functionsMonthlyDXRacer King Series instruction manual
Check all bolts, screws and knobs and tightenAt least every 90 daysRazer Iskur V2 X Master Guide
Detailed inspection of mechanical parts, tighten loose screws and boltsApproximately every six monthsAndaSeat Aftercare Guide
Check screws and bolts and re-tightenEvery few monthsSecretlab Titan Evo user manual
Check screws and bolts and re-tightenPeriodically, no fixed intervalDXRacer Formula, Racing and Sentinel manuals
Clean casters, remove hair and debrisRegularly; no set intervalSecretlab, DXRacer and AndaSeat care pages
Redistribute the piston lubricant (Secretlab procedure, troubleshooting section)When height movement loses smoothness; no set intervalSecretlab Aftercare Guide

Troubleshooting: squeaks, sinking, wobble and dragging casters

ProblemLikely causeFix
Squeaks and creaks when you sit, recline or swivelLoose fasteners (Secretlab and DXRacer both name this first)Tighten all assembly screws and bolts, especially the backrest, armrests and tilt mechanism (Secretlab Titan Evo manual). One Secretlab manual variant allows a small amount of silicone lubricant on moving parts if tightened joints still creak.
Chair slowly sinks, or will not hold its heightOn a Secretlab, piston lubricant that has settled; on any chair, a worn piston (AndaSeat)Secretlab first: sit in the chair and run it from its highest setting to its lowest at least 10 times; then, at the lowest setting, turn slowly through 5 full turns clockwise and 5 full turns anti-clockwise. If the lever is fully engaged and the chair still sinks (Secretlab) or adjustment stays improper (AndaSeat), the piston is the fault and it may be time to replace the gas piston. See the safety section first.
Wobble or a chair that feels unstableLoose assembly screws, or an uneven floor (Secretlab)Tighten all assembly screws, especially those joining the backrest and the mechanism to the seat, and use the chair on a flat, level surface (Secretlab Titan Evo manual). Razer: do not use the chair unless all bolts, screws and knobs are firmly secured.
Casters dragging, clicking or scratching the floorHair, dust and debris in the casters (all makers); the wrong caster tread for the floor (Razer and DXRacer)Remove hair, dust and debris from the caster wheels (Secretlab manual); clear attached paper, stickers and fibres, then wipe the casters with a damp cloth (AndaSeat). If clean casters still mark a hard floor: Razer limits hard tread casters to carpet and asks for soft tread casters on hard floors, and DXRacer asks for a protective carpet where the floor can be damaged.
Loose or wobbling armrestsLoose mounting screws, or tops not seated (Secretlab)Tighten the bolts securing the armrests to the underside of the seat base, and check the replaceable armrest tops are securely attached and undamaged (Secretlab Titan Evo manual).
Backrest sits crooked after assembly or a moveBackrest misaligned at its four mounting screws (Secretlab)Follow Secretlab's correction: remove the side covers, loosen all four M8 screws with the provided Allen key until the backrest can move, reposition it, hold it in place and fully tighten, left side and then right.

Safety

Tip over and how you sit. Sit in the centre, back to the backrest (Secretlab) or with your centre of gravity on the seat and your back on the lumbar support (Razer); do not sit at the front edge, stand on the chair, place all your weight on the backrest only, or push down on the backrest when a person is reclined (Secretlab, Razer). DXRacer King manual: do not use the reclining and lifting functions at the same time, lock the tilt mechanism when fully unfolded, keep both feet on the ground when fully reclined, and use smooth, controlled movements (sudden or excessive force can tip the chair). Sitting on the front edge can also compromise balance and void warranty protection (AndaSeat). Clothing with rivets, studs or sharp objects damages the product (DXRacer). Manoeuvre the product carefully, mindful of hand and finger placement around sliders and levers (Razer).

Weight limits, per model: Secretlab Titan Evo Regular 285 lb (129 kg) maximum; Razer Iskur 300 lb (136 kg); DXRacer King 150 kg, approved gas lift limit 150 kg separately; AndaSeat: no single figure, follow your chair's recommended limit, because exceeding it can overstress the chair and increase wear. One person at a time (all makers).

Children. Secretlab: leave the red recline safety tab screwed in, so a child cannot knock the backrest into a new position, and keep hands and fingers away from the recline mechanism. DXRacer: children must be supervised by an adult while assembling or operating. Secretlab's magnet safety pages: keep any magnet small enough to swallow away from children and pets. A swallowed magnet can injure seriously: get medical help at once if one is swallowed or inhaled. Neodymium magnets can also disturb pacemakers and other implanted medical devices.

The gas lift. DXRacer: only trained personnel should replace or repair the seat height parts that store energy; never open up or interfere with the gas lift cylinder, because tampering with it can make it burst and injure someone. DXRacer's Formula manual: do not lubricate the gas lift cylinder; if it malfunctions, contact customer support. AndaSeat differs, printed rather than resolved: apply lubricating oil to the piston rod and moving parts periodically.

Stability and when not to sit. Razer: do not use the chair unless all bolts, screws and knobs are firmly secured, and check them at least every 90 days. DXRacer King manual: if anything is loose, missing or damaged, contact the reseller and stay off the chair until it is sorted; check all parts and functions monthly. Razer, warranty version: if parts are missing, broken, damaged or worn under warranty, replacement parts will be provided; do not use until repaired or replaced.

When to repair, when to replace

Replace parts first. Casters: replace when inspection shows damage or wear (AndaSeat); Secretlab sells caster sets through its own store; DXRacer sells casters, hydraulics, armrests, wheelbases and tilt mechanisms through its own Parts Page. Gas lift: sinking and failed adjustment are the signs it may be time to replace the piston (AndaSeat); a Secretlab manual sets the same endpoint for a chair that still will not hold height after the lever check. DXRacer reserves gas lift replacement to trained personnel: use a maker's part, not a generic cylinder. Armrest tops are replaceable by design (Secretlab).

Replace the chair when the structure is gone: cracked or split base, damaged frame, mechanism that stays loose after re-tightening, or a cover cracked and peeled across the seat or worn through. DXRacer: stop using a chair with loose, missing or damaged parts until resolved. Secretlab warrants its chairs for 3 years, or 5 years when registered under its extended programme, excluding wear and tear, aging of materials, improper assembly, use or care, and failure to follow its assembly and aftercare instructions.

Our Best Gaming Chair for Big Guys guide shortlists by capacity and seat dimensions; our How to Choose a Gaming Chair: Types, Features and Sizes Explained guide works through capacity, size, frame, recline and materials; our Best Gaming Chair Under 200 guide shows the budget alternative to the cost of a maker's caster set or piston.

Gaming Chair: Frequently Asked Questions

How often should you clean a gaming chair?

AndaSeat: thorough clean every week, vacuum then wipe down. Razer: once a month with a soft or microfibre cloth and warm water. Secretlab and DXRacer: regular, routine wiping, no fixed interval. All agree on cleaning spills up immediately.

How do you make a gaming chair last longer?

Check bolts on your maker's rhythm: monthly for DXRacer's King line, at least every 90 days for Razer, about every six months for AndaSeat's detailed inspection, every few months for Secretlab. Keep the cover wiped, casters clear of debris, and sit centrally within the weight limit.

How should you store a gaming chair properly?

No maker publishes a dedicated storage routine. Clean the chair, air dry it completely, and store it in a cool, dry place away from sunlight and heat. For a move, disassemble with the maker's assembly guide in reverse rather than carrying the chair by its armrests, and rebuild with casters fully seated and bolts secured.

What are the most common mistakes that damage a gaming chair?

Using a harsh, solvent or abrasive cleaner where the maker allows only a damp cloth or mild soap solution (AndaSeat: leads to cracking and peeling); rubbing a fabric spill or using hot water on it (Secretlab: can set the stain); soaking a seat or cushion that should only be wiped; using soap on a Razer Iskur V2 X, banned by its guide; and overloading the chair, perched on the front edge, or standing on the seat.

When should you replace a gaming chair?

Replace maker supplied parts first: worn casters, a gas piston that sinks or will not adjust, worn armrest tops. Replace the chair when the structure has gone: cracked base, damaged frame, mechanism that will not stay tight, or a cover cracked and worn through. If your hours have changed, also ask whether the type still fits: our Gaming Chair vs Office Chair comparison covers where a big and tall office chair serves desk hours better, and where a gaming chair still wins.

Keep researching this gaming chair

How we check care guides like these

Read the full Pick Hearth methodology
  • Every instruction and interval in this guide is traced to the manufacturer manual or official support page named beside it in our research notes: Secretlab's Aftercare Guide and Titan Evo manuals, DXRacer's chair manuals and official FAQ, AndaSeat's Aftercare Guide, and Razer's Iskur Master Guides. ✓ Where makers disagree we print each maker's figure rather than averaging: weekly cleaning for AndaSeat against monthly for Razer, a monthly full check for DXRacer's King line against a 90 day bolt check for Razer and a six month inspection for AndaSeat, and a gas lift that DXRacer says never to lubricate against a piston AndaSeat tells you to oil periodically. ✓ No brand can pay for a place in this guide, and affiliate earnings never change the guidance.

First published · Updated in place as manuals and guidance change