That second question is where readers get caught out. An attachment bought for a mixer that is not in the house is dead weight in a drawer, while an attachment bought for a mixer that already lives on the counter can be the neatest pasta setup of all, because the heavy motor, the footprint and the storage problem were solved by a purchase made for other reasons. Read this guide from your own counter outward. If a KitchenAid stand mixer is already there, the attachment side competes on equal footing. If it is not, the standalone side wins by default, whatever the rollers can do.

The short answer

Buy the standalone side if pasta making has to stand on its own in your kitchen. The three machines here cover the full range of that promise: two Italian hand crank rollers that clamp to a counter edge, work without power and store in a cupboard, and one countertop extruder that mixes, kneads and pushes out shaped pasta from its own 150W motor. None of them cares what else you own.

Buy the attachment side only if a KitchenAid stand mixer already earns counter space in your home. On that condition the case is strong. The mixer motor drives the rollers, so both of your hands stay free to guide and catch the sheet, the attachments themselves are compact stainless steel parts that live in a drawer, and the same hub can grow from a single roller to cutter sets and an extrusion press over time. Without the mixer, there is no case at all, and no attachment in this guide should be bought as the first step toward one.

  1. Marcato Atlas 150 pasta maker in chrome steelMarcato Atlas 150Standalone side: the hand crank roller with the widest thickness rangeCheck price on Amazon
  2. Imperia iPasta Classic pasta machine in steelImperia iPasta ClassicStandalone side: the traditional steel roller with a motor optionCheck price on Amazon
  3. Philips 7000 Series Pasta Maker in whitePhilips 7000 Series Pasta MakerStandalone side: the fully automatic extruder with its own motorCheck price on Amazon
  4. KitchenAid Pasta Roller & Cutter Set in stainless steelKitchenAid Pasta Roller & Cutter SetAttachment side: the roller plus two cutters for mixer ownersCheck price on Amazon
  5. KitchenAid Gourmet Pasta Press attachment in whiteKitchenAid Gourmet Pasta PressAttachment side: the extruder that runs off the mixer hubCheck price on Amazon
  6. KitchenAid Pasta Roller attachment in stainless steelKitchenAid Pasta RollerAttachment side: the single roller for sheets and hand cut pastaCheck price on Amazon

Prices move up and down on Amazon, so we never print a price here that could be stale by the time you read it. Use the price check button to see the current price.

Pasta Maker vs KitchenAid Attachment: The Key Differences

Drive is the whole comparison, and everything else arranges itself around it. A standalone machine answers to one of two power sources. The two crank rollers in this guide answer to your arm: you turn, the rollers turn, and the pace, the pressure and the pauses are all yours, which is why crank rolling feels controlled and also why a long batch is physical work. The Philips extruder answers to its own motor and takes over mixing and kneading as well as shaping. An attachment answers to a third party. The KitchenAid motor turns the roller or pushes the press auger through the hub at the front of the mixer, and the quality of that arrangement depends entirely on a machine this guide does not sell you.

Hands follow from drive. Crank rolling is a one hand job with the other hand feeding and catching, and beginners feel that coordination in the first sheet. Mixer driven rolling frees both hands, one to feed and one to receive, which is the single most practical advantage the attachment side holds and the reason sheets come out long and even with less practice. The extruders on both sides remove the sheet problem altogether by forming shapes directly, and in exchange they fix the menu: a disc or a plate decides what dinner looks like.

Storage cuts the other way once the mixer is already owned. The attachments are small parts, the heaviest set here at 7.5 lb and the single roller at 2.4 lb, and they wait in a drawer while the mixer holds the counter. Standalone rollers store almost as well, because a clamp on machine comes off the counter in seconds. The standalone extruder is the storage problem of the six, a 20 lb appliance that needs a permanent home. The wider framework for weighing width, drive and batch size before any of this sits in how to choose a pasta maker.

Cleaning is closer than the marketing suggests. Rollers on both sides live by the same rule: no water, no dishwasher, let the dough dry for an hour and brush it away. Extruders differ by side. The Philips parts detach and can go in a dishwasher, while the KitchenAid press splits the difference, with its auger, ring and combination tool dishwasher safe and the rest wiped and brushed clean.

Point of differenceStandalone pasta makerKitchenAid attachment
Power sourceYour arm, or a motor built into the machineThe stand mixer motor, through the front hub
Works without other equipmentYesNo, a KitchenAid stand mixer is required
Hands during rollingOne hand cranks, one hand guidesBoth hands free to feed and catch
Where it livesCupboard for rollers, counter for extrudersA drawer, while the mixer holds the counter
Sheet width in this guide150 mm on both rollers6 in on both rollers
Extrusion routeOne countertop extruder with 8 discsOne hub driven press with 6 plates
Cleaning patternBrush only for rollers, dishwasher parts on the extruderBrush only for rollers, part dishwasher safe press
Growth pathExtra cutters, or a motor kit for the crank machinesMore cutters and a press on the same hub

The six products below put figures on that split. Read the drive and mixer columns first, because they decide whether the rest of the row is available to you at all.

ProductSideDriveSheet or extrusionThickness settingsShapes in the boxBody materialWeightMixer required
Marcato Atlas 150Marcato Atlas 150StandaloneHand crank150 mm roller10Sheets, fettuccine, taglioliniChrome plated steel2.6 kgNo
Imperia iPasta ClassicImperia iPasta ClassicStandaloneHand crank150 mm roller6Sheets, fettuccine, taglioliniChromed steel7.6 lbNo
Philips 7000 Series Pasta MakerPhilips 7000 Series Pasta MakerStandaloneOwn 150W motorExtrusion, 8 discsNone, automatic8 disc shapesMetal and plastic20 lbNo
KitchenAid Pasta Roller & Cutter SetKitchenAid Pasta Roller & Cutter SetAttachmentMixer driven6 in roller8Sheets, spaghetti, fettuccineStainless steel7.5 lbYes
KitchenAid Gourmet Pasta PressKitchenAid Gourmet Pasta PressAttachmentMixer drivenExtrusion, 6 platesNone, plate basedSpaghetti, bucatini, fusilli, rigatoni, small macaroni, large macaroniMetal with white housing2.7 lbYes
KitchenAid Pasta RollerKitchenAid Pasta RollerAttachmentMixer driven6 in roller8Sheets only, cutters separateStainless steel2.4 lbYes

The Standalone Pasta Maker Options, in Full

Three machines that need nothing beyond flour, eggs and a counter: two crank rollers with different ranges and growth paths, and one automatic extruder that trades sheet work for shaped pasta.

Marcato Atlas 150 manual pasta machine in chrome steel
Standalone side: the hand crank roller with the widest thickness range

Marcato Atlas 150

Against the attachment side, the Atlas 150 makes the independence argument in its purest form. It rolls a sheet 150 mm wide through ten thickness settings running from 4.8 mm down to 0.6 mm, the widest adjustment range of any roller in this guide, and it does so with a hand crank and a counter clamp that are both in the box. The body is chrome plated steel over alloy rollers and the whole machine weighs 2.6 kg, heavy enough to feel planted while you turn and light enough to lift into a cupboard afterwards. Fettuccine and tagliolini come from the built in double cutter, lasagne uses the sheet as it leaves the rollers, and the machine accepts extra cutting attachments and a drive motor later if hand cranking ever wears thin. Nothing about it immerses or dishwashes; dried dough brushes off the rollers.

Marcato covers the Atlas 150 against manufacturing defects for two years. Buy it if you want sheet pasta under your own power, with the broadest thickness control on this page and no other appliance in the chain. Skip it if rolling by hand for a full batch sounds like a chore you will dodge, because an unused crank machine helps nobody.

Pros

  • Ten thickness settings from 4.8 mm to 0.6 mm, the widest range here
  • 150 mm sheets for lasagne, fettuccine and tagliolini from one machine
  • Crank and clamp included, works with no power and no other appliance
  • Extra cutters and a drive motor fit the same machine later

Cons

  • One hand cranks while the other guides, which takes practice
  • Brush cleaning only, with no water and no dishwasher
  • Dough mixing and kneading happen before the machine is involved
Check price on Amazon
Imperia iPasta Classic manual pasta machine in chromed steel
Standalone side: the traditional steel roller with a motor option

Imperia iPasta Classic

The iPasta Classic covers the same 150 mm ground as the Atlas with a narrower, simpler dial: six thickness positions spanning 0.5 mm to 5 mm, a double cutter that divides sheets into 6.5 mm fettuccine and 2 mm tagliolini, and a chromed steel body with a wooden grip on the crank. At 7.6 lb it is the heaviest of the hand machines here, and that weight works for it at the counter, where it sits on a non-slip base and clamps down before the first turn. The box rounds the machine out with a cotton storage pouch, a cleaning brush and the table support. Its side clamp slot accepts the Pasta Facile 4600 electric motor, so this crank machine carries its own route to powered rolling without handing the job to a mixer hub.

Buy it if you prefer the plainer traditional layout, value the ready motor upgrade and want the roller, pouch and brush settled in one box. Skip it if fine thickness steps matter to your cooking, because six positions leave bigger gaps between settings than the ten on the Atlas.

Pros

  • 150 mm sheets with fettuccine and tagliolini from the double cutter
  • Side slot accepts a dedicated electric motor later
  • Cotton pouch, brush, clamp and non-slip base all included
  • Heavy chromed steel body stays steady while cranking

Cons

  • Six thickness settings, the fewest of the rollers here
  • Brush cleaning only, never water or a dishwasher
  • Heaviest hand machine in the guide at 7.6 lb
Check price on Amazon
Philips 7000 Series Pasta Maker automatic extruder in white
Standalone side: the fully automatic extruder with its own motor

Philips 7000 Series Pasta Maker

This machine is the standalone answer to the attachment press, and the contrast is instructive. Where the KitchenAid press borrows a motor, this one brings its own: a 150W drive that mixes, kneads and extrudes in one sealed routine, turning flour and liquid into finished pasta through eight shaping discs. Capacity runs to 700 g of pasta, up to eight portions in one run, with a 250 g batch ready in under ten minutes. The mixing paddle and front panel are metal, the body measures about 12.9 by 9.0 by 12.7 inches, and at 20 lb it is by far the heaviest product in the guide, a countertop resident rather than a cupboard guest. Detachable parts go in the dishwasher, which no roller on either side can match, and recipe guidance runs through the HomeID app. The official Philips page for this model sets out the disc set, the capacity figures and the two year warranty that covers the machine.

Buy it if weeknight pasta only happens when a machine does every stage, and your counter can give it a permanent bay. Skip it if lasagne sheets, ravioli or hand cut ribbons are the point, because an extruder forms shapes and never rolls a sheet.

Pros

  • Mixes, kneads and extrudes from its own 150W motor
  • Eight shaping discs and up to eight portions per run
  • Detachable parts are dishwasher safe
  • Two-year warranty

Cons

  • No sheets, so no lasagne, ravioli or hand cut pasta
  • 20 lb body needs permanent counter or shelf space
  • Disc shapes are the whole menu, with no roller route
Check price on Amazon

The KitchenAid Attachment Options, in Full

Three hub driven tools for kitchens where the mixer is already bought and earning its place: a complete roller and cutter set, an extrusion press, and the single roller that starts the system at its simplest.

KitchenAid Pasta Roller & Cutter Set with roller, spaghetti cutter and fettuccine cutter
Attachment side: the roller plus two cutters for mixer owners

KitchenAid Pasta Roller & Cutter Set

This three piece set is the attachment side at its most complete. A roller flattens dough into sheets 6 inches wide across eight thickness settings, a spaghetti cutter divides sheets into 2 mm strands and a fettuccine cutter into 6.5 mm ribbons, and a cleaning brush rides along in the box. Rollers and cutters are stainless steel, the set weighs 7.5 lb, and it fits every household KitchenAid stand mixer, with the mixer itself bought separately and required for every job the set does. Because the motor drives the roller, both hands stay on the dough, guiding the sheet in and catching it as it leaves, and long sheets for lasagne or ravioli come out even without the crank side coordination a standalone roller demands. Care follows the roller rule on the official KitchenAid pasta tips page: let the parts air dry for an hour, brush the dried dough away, and keep them out of water and out of the dishwasher. One year warranty cover applies.

Buy it if your mixer already lives on the counter and sheet pasta is a weekly habit you want both hands free for. Skip it if you do not own the mixer, full stop, and skip it if tubes and spirals matter more than sheets, because cutting is where this set ends.

Pros

  • Roller plus spaghetti and fettuccine cutters in one set
  • Eight thickness settings on 6 in stainless steel rollers
  • Both hands free while the mixer motor drives the work
  • Fits all household KitchenAid stand mixers

Cons

  • Completely dependent on a stand mixer bought separately
  • Brush cleaning only, with no immersion and no dishwasher
  • Sheets and two cuts only, with no extrusion shapes
Check price on Amazon
KitchenAid Gourmet Pasta Press with interchangeable plates and storage case
Attachment side: the extruder that runs off the mixer hub

KitchenAid Gourmet Pasta Press

The press is the one attachment here that leaves sheet work behind entirely. Dough pieces feed into the housing, the mixer drives an auger, and pasta emerges through one of six interchangeable plates: spaghetti, bucatini, fusilli, rigatoni, small macaroni and large macaroni, with a built in wire cutter to trim lengths as the strands come through. The set packs the press, a dough pusher, the six plates and a stainless steel cleaning tool into its own storage case, weighs 2.7 lb, and was made in Italy. It fits all household KitchenAid stand mixers and, like every product on this side, does nothing at all without one. Cleaning splits by part: the auger, pasta ring and combination tool are dishwasher safe, while the housing and plates want brushing and wiping once the dough has dried.

Buy it if your mixer is established and the shapes you crave are tubes, spirals and hollow strands that no roller can form. Skip it if sheets are your staple, because this press cannot flatten dough, and skip it without a mixer for the same reason as every attachment here.

Pros

  • Six plates cover tubes, spirals and hollow shapes rollers cannot make
  • Built in wire cutter trims pasta as it extrudes
  • Storage case keeps press, plates and tools together
  • Auger, ring and combination tool are dishwasher safe

Cons

  • No sheet rolling, so lasagne and filled pasta need another tool
  • Useless without a KitchenAid stand mixer
  • Small dough loads feed in pieces rather than one large batch
Check price on Amazon
KitchenAid Pasta Roller single attachment in stainless steel
Attachment side: the single roller for sheets and hand cut pasta

KitchenAid Pasta Roller

The single roller strips the attachment idea down to its first job. One stainless steel roller, 6 inches wide with eight thickness settings, flattens dough into sheets while the mixer motor turns it, and the sheets then head for lasagne trays, ravioli assembly or a knife and a steady hand for ribbons cut the old way. It weighs 2.4 lb, measures about 9.7 by 3.8 by 2.2 inches, arrives with a cleaning brush, carries a one year warranty and fits all household KitchenAid stand mixers, with the usual condition that the mixer is a separate purchase. KitchenAid cutters built for the same hub can join it later, which makes this the one attachment here bought as a beginning rather than a finished kit. Cleaning matches its set mates: brush the dried dough away and keep the roller out of water.

Buy it if you own the mixer, make mostly sheet pasta, and would rather add cutters only if the habit sticks. Skip it if you want noodles on the first night, because no cutter is in this box, and skip the whole side if the mixer is missing.

Pros

  • Lightest attachment here at 2.4 lb, stores in any drawer
  • Eight thickness settings on a 6 in stainless steel roller
  • Cutters for the same hub can be added later
  • One-year warranty

Cons

  • Sheets only, with no cutter included
  • Requires a KitchenAid stand mixer to turn at all
  • Hand cutting ribbons takes longer than a cutter pass
Check price on Amazon

Pasta Maker vs KitchenAid Attachment: Pros and Cons Side by Side

Standalone pasta makers

Pros

  • Every machine works on arrival, with no second appliance in the chain
  • Crank rollers need no power and store in a cupboard between uses
  • The standalone extruder mixes and kneads as well as shapes
  • Thickness range peaks at ten settings on the Atlas 150

Cons

  • Crank rolling ties up one hand and rewards practice
  • The countertop extruder claims permanent space at 20 lb
  • Each machine is a single purpose purchase with its own storage need
  • Powered rolling on a crank machine means buying a motor kit later

KitchenAid attachments

Pros

  • The mixer motor drives the work, leaving both hands on the dough
  • Attachments are compact parts that store in a drawer
  • One hub grows from a single roller to cutters and a press
  • Stainless steel rollers and cutters across the roller sets

Cons

  • Every attachment is inert without a stand mixer in the house
  • The true setup pairs each attachment with a large counter appliance
  • Roller cleaning is brush only, with no water at any point
  • Each shape family is a further attachment purchase

Which Should You Choose

Choose a standalone pasta maker if no stand mixer lives in your kitchen

Choose the standalone side, and close the question there. Every attachment in this guide waits on a mixer you do not have, and buying a large counter appliance to justify a roller reverses the logic of the purchase. Your wider shortlist of machines that work on their own is in best pasta maker for home, where crank, motorised and extrusion models sit side by side.

Choose a KitchenAid attachment if your mixer already earns its counter space

Choose the attachment side if the mixer is out weekly for doughs, batters and everything else, because pasta then rides on a motor and a footprint you have already accepted. The roller and cutter set is the complete version of that choice, and the single roller is its cautious first step.

Choose a standalone roller if sheets, lasagne and filled pasta run your cooking

Choose a crank roller if your pasta life is sheets first: lasagne layered straight from the roller, ravioli assembled on the counter, ribbons cut wide or narrow as the sauce demands. Ten settings on the Atlas or six on the Imperia both beat any extruder at this work, because extruders on either side cannot roll at all.

Choose an extruder if shaped pasta matters more than sheets

Choose extrusion, then pick your motor. The Philips brings its own and adds mixing and kneading to the bargain, at the cost of permanent counter space. The KitchenAid press borrows the mixer and stores in a case in a drawer, at the cost of total dependence on that mixer being present and free.

Choose the attachment side if both hands free is the upgrade you actually want

Choose mixer driven rolling if your crank sheets come out uneven because one hand is always busy turning. Both hands on the dough is a real technique change, not a luxury, and it is the strongest single reason a mixer owner switches sides even while keeping a crank machine in the cupboard.

What Each Option Costs to Own

Running costs on both sides are low and mostly about time, storage and the occasional part, and the tier question that sits behind this comparison, whether the budget end or the premium end of pasta making costs less to own, lands differently once the mixer enters the maths. For a reader who already owns the mixer, an attachment is the budget route to powered pasta: the expensive motor is already bought, and each added shape is one more part rather than one more appliance. For a reader without one, the same attachment is the premium route wearing a small price tag, because the mixer purchase rides underneath it invisibly. A hand crank roller is the cheapest complete system to own over years, needing nothing but flour for the rollers and a brush that comes in the box. Readers pricing that tight end properly should read best pasta maker under $50 before assuming the Italian rollers are the floor.

On the standalone side, ownership spend is close to zero. Crank machines have no filters, no seals kits and no power draw worth counting, and their lifespan turns on dry storage and brush cleaning, since water inside a roller is what shortens a steel machine's life. The Philips adds electricity in small amounts, dishwasher cycles for its parts and a larger eventual replacement question, because a sealed automatic appliance is repaired as a unit rather than part by part. Premium standalone money buys thickness range, batch capacity and automation, not lower running costs.

On the attachment side, the parts themselves ask for little: brushes are included, the press case keeps plates from scattering, and the mineral oil drop for roller gears once a year or so is the closest thing to a consumable. The honest cost sits one level up, in the mixer itself. Its purchase, its servicing and its counter claim belong on this side's ledger whenever the mixer was bought with pasta in mind. Lifespan follows care on both sides: attachments stored dry in a drawer and standalone rollers stored dry in a cupboard both outlast machines left damp, dusty or loaded with old dough.

Also Considered

  • Marcato Atlasmotor: the Atlas 150 paired with its drive motor in one set, giving powered rolling with a crank fallback. It missed the six because the Atlas 150 already holds the roller place with the motor available as a later addition, and the Philips covers the fully powered standalone role.
  • KitchenAid Pasta Cutter Set: a two piece companion set cutting 12 mm lasagnette and 1.5 mm capellini, for sheets a roller has already made. It missed the six because it cannot start a pasta setup on its own; it widens a roller you already own rather than replacing any pick here.
  • KitchenAid Ravioli Maker: a hub mounted former that folds two 6 inch sheets around filling from its hopper and seals three rows of large pocket ravioli, turned by hand. It missed the six because it needs sheets rolled by another attachment first and does one filled shape only.
  • Hamilton Beach Electric Pasta Maker: a countertop extruder with seven discs, an internal scale that weighs ingredients and works out the flour to liquid ratio, and 2 to 3 servings in 15 minutes. It missed the six because the Philips covers the standalone extruder place with eight discs and a far larger batch.
  • Philips Viva Collection Pasta Maker: a compact automatic extruder with three discs making about 450 g of pasta in 18 minutes. It missed the six because the 7000 Series covers the same job with more than double the discs and capacity, and compactness alone did not outweigh that gap here.

When You Need Both, or Neither

Both makes sense in the mixer owning household that also cooks away from that mixer. The attachments handle the weekly sheet and shape work at home with both hands free, while a crank roller travels to a holiday kitchen, a garden table or a relative's house and works anywhere a clamp fits, no hub and no outlet required. Plenty of serious pasta households also keep the crank machine as the teaching tool, because turning by hand shows a beginner what dough resistance should feel like. The daily handling habits that keep either kind of machine ready, flour dusting, patient drying before brushing and dry storage, are the core of how to use a pasta maker whichever side you land on.

Neither is the honest answer in two common kitchens. If fresh pasta is a twice a year event, a rolling pin, a sharp knife and patience produce a respectable sheet and ribbons with no purchase and no storage cost at all. And if the real attraction is the mixer rather than the pasta, buy the mixer for its own sake first and let the attachment question wait a season, because an appliance bought to justify an accessory satisfies nobody. Fresh egg pasta from any route also carries a storage rule worth knowing before the first batch: the FoodSafety.gov refrigerated food chart places fresh pasta in the discard column after more than two hours above 40 degrees, so leftovers go in the fridge promptly, whichever machine made them.

Pasta Maker vs KitchenAid Attachment: Frequently Asked Questions

What are the key differences between a standalone pasta maker and a KitchenAid attachment?

Drive and dependence. A standalone machine moves dough with your arm or with a motor inside its own body, so it works in any kitchen the day it arrives. An attachment has no drive of its own and turns only when a KitchenAid stand mixer turns it, which buys both hands free at the roller and total reliance on an appliance bought separately. Sheet widths, settings and shapes overlap heavily between the sides; the power question is the real divide.

Which costs less to own, a standalone pasta maker or a KitchenAid attachment?

It depends entirely on the mixer. In a house that already owns one, an attachment is the cheaper system to run and extend, since the motor cost is already paid and the parts need only brushing and dry storage. In a house without one, the standalone machine costs far less to own, because the attachment's true price includes the mixer underneath it. A hand crank roller is the lowest cost complete route on either side.

Can a KitchenAid attachment replace a standalone pasta maker?

For a mixer owner, yes, almost completely. The roller and cutter set matches a crank roller on sheets and ribbons with both hands free, and the press adds extruded shapes no roller makes. The replacement fails at the edges: nothing on the hub travels to a kitchen without that mixer, and filled pasta still wants sheet work plus hand assembly. For anyone without the mixer, the attachment replaces nothing at all.

Which is easier to use, a standalone pasta maker or a KitchenAid attachment?

Mixer driven rolling is easier on technique, because both hands guide the dough and the motor keeps a steady pace, while crank rolling asks one hand to turn and the other to do everything else until the rhythm settles. Extrusion is easier still on both sides: the Philips mixes and shapes in one routine, and the KitchenAid press needs only dough pieces fed in steadily. Mixing and kneading dough by hand remains the shared chore the rollers on both sides leave to you.

Which lasts longer, a standalone pasta maker or a KitchenAid attachment?

The steel parts on both sides are built for decades, and lifespan is decided by water and storage rather than by brand. Rollers and cutters that are brushed dry and stored in a cupboard or drawer keep their edges and gears, while any of them left wet or washed will suffer. The standalone extruder carries the shortest expected life of the six, because a sealed motor and electronics age in ways a plain steel roller never has to.

Keep Researching This Pasta Maker

How We Check Comparisons Like These

Read the full Pick Hearth methodology
  • Both sides checked against the manufacturers' stated specifications: every width, thickness setting, disc count, material and weight figure here traces to a listing or manufacturer document we recorded, with the mixer requirement treated as a specification in its own right rather than a footnote.
  • Verdicts follow the verified differences, not brand or price: the standalone verdicts rest on self contained drive and storage, the attachment verdicts on hands free rolling and hub based growth, and where an attachment cannot function at all without a separate appliance, this guide puts that fact at the centre instead of the small print.
  • No brand can pay for a place, and affiliate earnings never change a verdict: the six representatives were chosen to show the genuine range of each type, the full pool was searched against CPSC recalls before picking, and no pasta maker in this pool carries a recall that affects any pick here.

First published · Updated in place as products and specs change